Products

Contact Person : Ms. Zou lancle
Company Name : Shenzhen Mulview Technology Co., Limited
Tel : 86-755-88849659
Fax : 86-755-83722362
Address : Guangdong,Shenzhen,1F,A4 Building, Ni Tou Zui,9th Lane,Langkou,Dalang Avenue ,Bao'an District,Shenzhen City,China
Country/Region : China
Zip : 518109

15W ac/dc power supply(Led power)

<< Previous Product

Next Product >>

Product Detailed

Related Categories:Switching Power Supply

Detailed Product Description

15W ac/dc power supply,switch mode design,apply to LED driver
Low price and high reliability
AC input power suitable for the world
High efficiency and low operation temperature
Soft-start current can reduce the AC input impact effectively
With Short-circuit and overload protection
100% full-load burning test
Installed with EMI filter, minimum wave.
Conform to EN60950 GB4943 UL60950n Safety Standards
2 years warranty

S-15W series switch mode power supply

Model	S-15-5	S-15-12	S-15-24
DC output voltage	5V	12V	24V
Output voltage errorNote2	±2%	±1%	±1%
Rated output current	3A	1.3A	0.7A
Output current rage	0-3A	0-1.3A	0-0.7A
Wave and noise(Note 3	50mVp-p	50mVp-p	100mVp-p
Inlet stability(Note 4	±0.5%	±0.5%	±0.5%
Load stability (Note 5	±1%	±0.5%	±0.5%
DC output power	15W	15.6W	16.8W
Efficiency	65%	68%	72%
Adjustable range for DC voltage	+10,-5%	+10%	+10%
AC input voltage range	85-132VAC/170-264VAC Selected by switch, 47-63Hz240-370VDC
Input current	0.5A/115V 0.25A/230A
AC INnrush current	Cold-start current 15A /115V 30A/230V
Leakage current	<0.5mA/240VAC
Overload protection	105%-150%Type:Foldback:current limiting reset: auto recovery
Temperature coefficient	±0.02%/0-50
Setup rise hold up time	200ms,100ms,30ms
Vibration	10-500HZ,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltage	Input and output internal1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC
Isolation resistance	Input and output internal: Input and enclosure, Output and enclosure500VDC/100MΩ
Working temperature and humidity	-10~+60Refer to output derating curve,20%~90%RH
Store temperature and humidity	-20~+85.10%~95%RH
Overall dimension	99×97×35mm
Weight	0.3Kgs
Safety standards	Meet UL 1012 requirement(Not apply for the mark)
EMC standards	Meet FCC part15J Conduction class B
Note 1.The testing condition for the parameter above is :230VAC input, rated load, 2570% RH. Humidity. 2. Error. include the setting error, line stability and load stability. (Note: 5). 3. Wave test: adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: the load is from 0% to 100%.